Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare the best mandoline slicers by type, thickness range and hand guard design, with five picks for even slices and faster weekly meal prep.

A mandoline earns its place when a knife cannot keep up: a tray of potatoes for a gratin, a pile of cucumbers for pickles, or onions sliced thin enough to disappear into a sauce. The best mandoline slicers turn that work into a few even passes, but the category splits into very different tools. A flat Japanese board, a dial-adjusted benchtop model, a compact V-blade handheld and a boxed multi-blade set all slice, yet they differ in thickness range, blade changes and how your hand is kept away from the edge.

As an Amazon Associate, we earn from qualifying purchases.

This guide compares five models by the specs their makers publish: type, stated thickness range, blade set and the hand guard included. One safety point runs through every section. A hand guard or food holder does not make an exposed blade safe; it only keeps some distance between your fingers and the edge. Treat every model below as a sharp tool that demands full attention, and stop slicing well before the last piece gets small.

This article contains an affiliate disclosure: we may earn a commission when you buy through links on this page, at no extra cost to you.

Quick Answer

The OXO SteeL Chef’s Mandoline Slicer 2.0 is the best all-round pick for most kitchens, with 21 thickness settings in half-millimetre steps, straight and serrated blades, and a spring-loaded food holder. The Benriner Super Slicer suits cooks who want the thinnest cuts from a simple flat board, while the Mueller V-Pro set covers slicing, shredding and grating in one box.

The Picks in Detail

OXO SteeL Chef’s Mandoline Slicer 2.0

OXO SteeL Chef's Mandoline Slicer 2.0

OXO SteeL Chef's Mandoline Slicer 2.0

Check price on Amazon

OXO’s benchtop flagship is a flat adjustable mandoline built around a dial rather than loose blades. The maker lists 21 thickness settings in 0.5 mm increments running up to 9 mm, read from a top-view indicator window while you work. Two-sided main blades handle straight slices on one face and crinkle or waffle cuts on the other, and julienne and French fry blades are integrated into the body instead of stored separately.

The spring-loaded food holder is the safety centrepiece: it has a wide rim, holds produce down across the runway, and stores on the underside when not in use. Even so, the holder does not make the blade safe. It covers the top of the food, not the edge itself, and small pieces can still bring fingers close to the runway. The legs fold so the board stores flat.

  • Specs:
  • Type: benchtop flat adjustable mandoline
  • Thickness range: 21 settings in 0.5 mm increments, up to 9 mm per maker
  • Blades: two-sided straight and crinkle/waffle blade, integrated julienne and French fry blades
  • Blade material: Japanese stainless steel
  • Hand guard: spring-loaded food holder with wide rim included
  • Model number: 3114000

See the OXO SteeL Chef’s Mandoline Slicer 2.0 on Amazon

Benriner Super Slicer

Benriner Super Slicer

Benriner Super Slicer

Check price on Amazon

The Benriner Super Slicer, model BN-95, is the classic Japanese flat mandoline: a simple board, a very sharp straight blade and a thickness screw underneath. The maker states the slice thickness adjusts from 0.3 mm to 5 mm, the finest range in this guide, suited to paper-thin radish, garlic and cabbage. The runway is 95 mm wide, so it takes larger onions and potatoes than the narrower standard Benriner.

Four Japanese stainless steel blades come in the box: the fitted flat slicing blade plus fine, medium and coarse julienne blades that swap in with a single screw. A finger guard is included and clips onto the food. Use it for every pass, and understand its limit: once the piece is nearly gone your fingers are close to a blade that gives no warning. Many cooks finish the last centimetre with a knife instead, which is the right habit here.

  • Specs:
  • Type: flat adjustable Japanese mandoline
  • Thickness range: 0.3 mm to 5 mm, adjusted by screw, per maker
  • Blades: 4 Japanese stainless steel blades (1 flat, 3 julienne)
  • Runway width: 95 mm
  • Hand guard: finger guard included
  • Body: BPA-free plastic on the current model
  • Model number: BN-95 (BN-95W)

See the Benriner Super Slicer on Amazon

Microplane Adjustable Mandoline Slicer with V-Blade

Microplane Adjustable Mandoline Slicer with V-Blade

Microplane Adjustable Mandoline Slicer with V-Blade

Check price on Amazon

Microplane takes the V-blade route. Instead of one straight edge, two angled blades meet in the middle, so food is drawn into the cut from both sides; the design suits firm produce that can skid on a flat blade. The deck is reversible: one side carries the V-blade for plain slices and the other a julienne blade, so switching cuts means flipping the deck rather than handling a loose blade.

A dial adjusts thickness, though Microplane does not publish a numeric range for this model, so that figure is not stated here. The tool is a handheld design about 14 inches long including the handle and roughly 4 inches wide, with a soft-touch handle and a hand guard included. The guard is a small push-style holder, and the same warning applies: it reduces contact, it does not remove the risk.

  • Specs:
  • Type: handheld V-blade mandoline with reversible deck
  • Thickness range: dial-adjustable; numeric range not stated by maker
  • Blades: stainless steel V-blade on one side, julienne blade on the reverse
  • Hand guard: included
  • Model number: 48040
  • Dimensions: about 14 in long including handle, about 4 in wide

See the Microplane Adjustable Mandoline Slicer on Amazon

OXO Good Grips Hand-Held Mandoline Slicer

OXO Good Grips Hand-Held Mandoline Slicer

OXO Good Grips Hand-Held Mandoline Slicer

Check price on Amazon

For small jobs, OXO’s hand-held slicer strips the idea down to a paddle with three settings. A slider selects 1 mm, 2.5 mm or 4 mm, and the clear window in the body lets you watch slices collect underneath while you work over a bowl or board. The stainless steel blade is fixed, so there is nothing to swap and nothing extra to store.

A food holder is included, and on a tool this small it matters more, not less: your holding hand is close to the blade by design. The holder does not make the blade safe, and neither does the comfortable grip; work slowly, keep the holder on from the first slice, and retire the last stub of any vegetable to the knife. For a couple of potatoes, a cucumber or an onion, though, this is the fastest of the five to grab, use and rinse.

  • Specs:
  • Type: handheld mandoline slicer
  • Thickness settings: 1 mm, 2.5 mm and 4 mm per maker
  • Blade: stainless steel, fixed
  • Hand guard: food holder included
  • Body feature: clear window shows slices as they collect
  • Model number: 1119100

See the OXO Good Grips Hand-Held Mandoline Slicer on Amazon

Mueller V-Pro Mandoline Slicer

Mueller V-Pro Mandoline Slicer

Mueller V-Pro Mandoline Slicer

Check price on Amazon

The Mueller V-Pro is the boxed multi-blade set of the group. The body carries an integrated V-blade, and five interchangeable blades slot in for slicing, shredding, grating, a wavy cut and coarse shredding, making it as much a prep station as a slicer. A dial adjusts the slicing thickness; Mueller does not state a numeric range in its listing data, so that figure is not stated here.

The box includes a safety food holder and a storage container for the blades, and that container is a genuine safety feature in the drawer, where loose blades cause cuts when nobody is slicing at all. The holder follows the same rule as every guard in this guide: it helps keep fingers off the runway, but it does not make the blade safe, and the interchangeable blades are exposed whenever you swap them, so handle each by its frame. Mueller also lists cut-resistant gloves among the accessories for this style of slicer; treat gloves as an extra layer, never as a guarantee of protection.

  • Specs:
  • Type: boxed multi-blade set with integrated V-blade
  • Thickness range: dial-adjustable; numeric range not stated by maker
  • Blades: 5 interchangeable blades (slicer, shredder, grater, wavy, coarse shredder)
  • Hand guard: safety food holder included
  • Storage: blade container included
  • Model number: MU-MANDO

See the Mueller V-Pro Mandoline Slicer on Amazon

How to Choose

Start with type. Benchtop flat models such as the OXO SteeL give the widest thickness ranges and most cut styles, and suit cooks who slice weekly. A flat Japanese board such as the Benriner goes thinnest and is simplest to clean, but asks for more technique. V-blade designs centre the food as it cuts and handle mixed loads well. A small handheld is right when most jobs are one or two vegetables.

Next, read the thickness range the maker actually publishes. A stated range such as 0.3 mm to 5 mm or settings up to 9 mm tells you whether the tool covers your recipes; where a maker publishes no numbers, expect a general-purpose tool rather than a precision one. Then check the guard: confirm the holder in the box is one you will actually use, because a guard left in the drawer protects nothing. Finally, think about storage: integrated blades and containers keep edges covered between uses, while loose blades need a plan of their own.

Who Should Skip

Skip mandolines entirely if you are not willing to use the food holder on every pass; a knife is slower and far more forgiving. Skip the Benriner if you want thick cuts beyond its 5 mm ceiling or click-stop settings instead of a screw adjustment. Skip the handheld OXO if you regularly slice for a crowd, since three fixed settings and a small runway will slow you down. Skip the Mueller set if drawer space is tight or you only ever make plain slices, and skip the Microplane if a published thickness range matters to you, because its maker does not state one.

FAQ

Is a hand guard enough to keep my fingers safe?

No. A guard keeps your hand off the food and adds distance from the blade, but the edge stays exposed and a guard can slip on wet or uneven produce. Use the holder from the first slice, slow down as the piece shrinks, and finish small ends with a knife.

Which mandoline slices the thinnest?

Of these five, the Benriner Super Slicer publishes the finest setting, at 0.3 mm. The Microplane and Mueller adjust by dial without a published numeric range, so their thinnest cuts cannot be compared on paper.

Are cut-resistant gloves a substitute for the food holder?

No. Some makers list cut-resistant gloves as an accessory for this kind of slicer, but no glove turns an exposed blade into a safe one, and gloves can dull your feel for the food. Treat them as an added layer alongside the holder, not a replacement.

How should I store loose mandoline blades?

Keep them in the container the maker supplies, as with the Mueller set, or wrapped in a thick towel in a drawer they do not share with everyday utensils. Wash and dry blades separately, never in a sink of soapy water where they hide.

Final Verdict

For most home kitchens, the OXO SteeL Chef’s Mandoline Slicer 2.0 is the pick: the widest published setting range here, two blade styles plus julienne, and a food holder designed to stay on the food. Choose the Benriner Super Slicer for the thinnest cuts and the simplest board to rinse and store. The Microplane suits cooks who prefer a V-blade in a compact handheld, the small OXO is the quick-draw option for one or two vegetables, and the Mueller V-Pro covers households that also want shredding and grating from the same box. Whichever you choose, the holder goes on every time.

R
Robert Hayes
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Is a hand guard enough to keep my fingers safe?
No. A guard keeps your hand off the food and adds distance from the blade, but the edge stays exposed and a guard can slip on wet or uneven produce. Use the holder from the first slice, slow down as the piece shrinks, and finish small ends with a knife.
Which mandoline slices the thinnest?
Of these five, the Benriner Super Slicer publishes the finest setting, at 0.3 mm. The Microplane and Mueller adjust by dial without a published numeric range, so their thinnest cuts cannot be compared on paper.
Are cut-resistant gloves a substitute for the food holder?
No. Some makers list cut-resistant gloves as an accessory for this kind of slicer, but no glove turns an exposed blade into a safe one, and gloves can dull your feel for the food. Treat them as an added layer alongside the holder, not a replacement.
How should I store loose mandoline blades?
Keep them in the container the maker supplies, as with the Mueller set, or wrapped in a thick towel in a drawer they do not share with everyday utensils. Wash and dry blades separately, never in a sink of soapy water where they hide.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Mandoline Slicers for Kitchens, Meal Prep and…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Subscribe & Save

Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.

Explore Subscribe & Save
Amazon Wedding Registry

Collect the home and kitchen items you want in one registry that guests can shop from.

Create a wedding registry
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.